SANDING
and POLISHING |
|||
 |
The FEIN Pipe Sander RS 12-70E is the specialist for stainless steel pipes,especially railing pipes such as hand rails and rods. | ||
Two
things
that
count
for processing
stainless
steel
surfaces
are performance
and speed.The
Fein
HIGH-POWER
MOTOR
provides
the pipe
sander
RS 12-70E
with
a working
speed
of up
to 22
m/s |
 |
||
 |
Stainless steel pipes with diameters from about 5/16" to 3" can be finished. Only two sanding passes are necessary for sanding or polishing pipes because the belt envelops 180° of the pipe. | ||
| Even hand rails that are already mounted can be finished if they are at least 2" away for the wall. And the "opening" of the belt is not necessary for closed pipe systems. |  |
||
| Appropriate personal protective equipment should be worn due to hazards that may be encountered while using portable power tools. This includes, but is not limited to protective eyewear, gloves, dust masks, and special clothing. Remove jewelry or loose clothing that could interfere with your application. Always inspect your power tools prior to use to make sure they are in proper working order. Cracked or loose motorhousings and frayed power cords are an indication that your power tool needs serviced. Never carry a power tool by its power cord. Always disconnect or unplug your tool before changing accessories (blades, bits, cutters). Failure to keep your power tools maintained in proper working order could result in personal injury. Do not use power tools in dangerous environments (damp, wet and/or explosive atmospheres). | |||
