The FEIN SuperCut FSC 1.6 has become a classic tool with respect to the removal of rigidly-bonded automobile windows. With special FEIN cutter blades matched to specific car models, hardened polyurethane beads can be cut through quickly, safely and without damage to the glass or the car body. Once the pane has been removed, the blade is simply switched, and the bead residue is trimmed before the new pane is bonded into place.

The FEIN SuperCut FSC 1.6 also saves a considerable amount of work as a chassis saw. As the saw blade does not rotate, no flying sparks are generated, meaning the risk of injury can be practically ruled out. The HSS saw blades cut though the body panels up to 1 mm thick, as well as load-bearing chassis sections made of double sheet metal. Plastic and fiberglass can also be cut through at a rapid rate. The FSC 1.6 is also ideal for fine chassis work such as grinding and polishing.

Fein’s Electric Putty Removal Tool: FSC 1.6, along with the # 166 Serrated Putty Remover Blade will Remove putty and push points in one single step, without damaging the rabbit of your window sash. This serrated Blade will safely increase productivity by reducing technician fatigue due to repetitive motion.

1. Speed setting for this application is #6
2. Start by laying the blade flat on the glass surface, cutting through the putty until the blade reaches the vertical leg of the rabbit.
3. Next insert the blade vertically into the putty using the vertical leg of the rabbit as a guide.
4. Press down on the tool until the blade reaches the edge of the glass or (the back bed) of the rabbit.
5. Push the tool forward, away from you at a slow even pace.
6. The blade will cut the putty and the push points from the vertical leg of the window frame in one easy step. In most cases without breaking the glass.

· Blades come in a (2) Pack/or in a kit
· This blade can be adjusted to (6) cutting positions
· T shaped designed to reach into window corners.
· Ideal for cutting and removing perimeter caulking/sealants from and around commercial storefront windows and doorframes.

Attaching the # 128 Mushroom Blade to the Fein Electric Tool, turns your tool into a power scraper, ideal for separating the glass from the spacer of an IG (insulated glass,) either single, dual seal or wiggle units. Removes and separates IG or singles glaze units from a wet glaze application set, i.e. silicone, white glue, liquid nails, butyl, Tremco 440 glazing tape and caulking without damaging the glass or window sash.

The mushroom blade will keep the technician’s hands away from the broken glass, while safely increase productivity.
1. Speed setting for this application is #2
2. Sharpen the blade on both sides before using.
3. Blade can be sharpened with a fine metal file, sharpening stone or wet belt machine.
4. Apply clean soapy water to cutting area during the removal process.
5. Keep the blade cool and wet will reduce glue build up on blade during the removal process.
6. Keep the blade pressed flat on the glass surface when inserting blade between glass and window sash frame, this will avoid glass breakage during the removal process.
7. Push the tool forward, away from you at a slow even pace.

· Blades come in a (5) Pack/or in kit
· Cutting lubricate consist of: Clean water
· Ideal for removing wet glazed glass units from wood, vinyl and aluminum window sash.
· Removes silicone sealant for the perimeter of shower encloses without damaging the adjacent bonding surface.

Attaching the 4” Flush Cut Saw Blade to the Fein Electric Tool, turns your tool into a hacksaw. It is also excellent removing hardened putty. Lay the blade against the glass WITHOUT harm and cut below the putty. Then come in at a 90-degree angle and cut the putty out. The High Speed Steel Blade will allow you to cut anything up to Tempered Steel quickly and safely. Speed setting for this application is #6

1. This blade has no set teeth, and will need to be rocked back and forth during the cutting process to clear the teeth for debris.
2. Note: When cutting aluminum, make sure to wax or lube blade before cutting.
3. Here is a list of some of the many things this blade will cut. Wood, Plexiglas, Plastic, Vinyl, Drywall, Rubber, Cooper, Leather.